The process of making battery shrapnel
Source: Benco Date: 2017/12/27 11:53:07 Visited:
Battery shrapnel belongs to hardware stamping, electronic hardware category. The English name is BATTERY CONNECTOR. It is also known as battery connector, charger terminal, battery connection contact piece, battery spring sheet, hardware battery, battery button and so on.
Is an important part of the battery using copper, iron, made of stainless steel material. Electroplating CT, silver and nickel. The battery clip installation on the conductive film is pressed, the current through the center point of contact to form a loop, the shrapnel PCB board. It has strong continuity, feel good.
Metal shrapnel as an important element in industrial system, with the use of large quantity, and variety, thus making the original metal shrapnel Handmade, gradually moving towards automation. In ninety years ago, only a few batteries shrapnel industry specializing in the production of batteries shrapnel with mechanical equipment, metal shrapnel market more and more large, gradually professional metal shrapnel device companies have entered our country, such as Taiwan's northeast machinery metal shrapnel (EN joting Philip (KHM) light gradually occupy the mainstream market. Production of metal shrapnel in Northeast China EN502 million can machine with mechanical, proprietary production of batteries shrapnel, convenient shaped elastic element Philip. Light equipment is the production of pressure spring and spring high speed equipment. There are many foreign professional metal shrapnel manufacturers such as Vafi Aus, MEC and other equipment no matter how to update the technology. The principle of production is very similar. They are all produced in this way. More than one pressing wheel is sent to the wire, and then all kinds of metal shrapnel are produced by winding or bending or bending.
The production process of battery shrapnel:
Battery spring is produced by cold stamping die processing, the material (metal or non-metal) processing into parts (or semi-finished products) is a special process. Stamping is at room temperature using the die installed in the press to put pressure on the material to produce plastic deformation or separation, thus obtained a pressure parts processing methods.
Copyright ©2017-2018 Dongguan Benco Hardware Technology Co., Ltd. All Rights Reserved. 粤ICP备18006273号-1 Powered by: ytclouds.netTop